Commercial window film · Toronto & the GTA

Glass is your biggest wall. Make it work harder.

Security, solar and privacy film for storefronts, offices, schools and institutions — installed after hours by a Madico SafetyShield Premier Partner, with a single point of contact from site visit to walkthrough.

Request a site visit Who we work with
Evening & weekend installs Phased, multi-site projects Spec sheets & test data on request

Who we work with

Different buildings, same three problems: break-ins, heat and privacy.

Retail & storefronts

Smash-and-grab goes through the front glass. Anchored security film keeps the pane in the frame and the thief outside long enough to give up. Dispensaries, jewellers, pharmacies, electronics.

Offices & boardrooms

Frosted bands and branded privacy film on glass partitions; solar film on the perimeter so the west side is usable at 3 pm and the HVAC stops fighting the windows.

Schools, places of worship & community

Forced-entry rated film on entry vestibules and ground-floor glass, specified to the same standards used on government buildings. Installed on your schedule, around your hours.

Property managers & new builds

Tenant comfort complaints, fading finishes, bird strikes, and glass that needs to meet a safety-glazing requirement after the fact. Film is faster and cheaper than replacing the units.

What we install

Three systems, one installer.

Row of new bi-fold glass doors on a commercial building
OUR SPECIALTY

Security & forced-entry

Madico SafetyShield® 1500 G2 anchored to the frame with structural silicone. Independently tested to ASTM F3561 (forced entry after a simulated active-shooter attack), EN 356 P2A, ASTM F1642 (blast) and UL 972 (burglary-resisting glazing).

  • Storefront glass, entry vestibules, ground-floor windows
  • Optional 7 mil exterior layer keeps the outer pane intact
  • Spec sheet and test summaries available for your insurer or board
See the test data →
Winsolux installer finishing a run of office windows from a ladder

Solar & glare control

Spectrally selective films on perimeter glass to cut solar heat gain and glare without darkening the space or changing the look of the building from the street.

  • Even temperatures across the floor plate
  • Screen glare down, blinds up
  • 99% UV — protects flooring, furniture and stock
  • Near-clear to reflective; we match existing glazing
Boardroom glass wall with frosted privacy film and a cut-out company logo

Privacy & branded

Frosted bands on partitions and meeting rooms, full-frost on washroom and clinic glass, and cut-vinyl logos and patterns so the privacy film carries your brand instead of hiding it.

  • Boardroom and office partition bands
  • Custom-cut logos, wayfinding and patterns
  • Reflective daytime privacy on street-facing glass
  • Distraction markings for code compliance on clear glass

A recent project

Two phases, one office building, zero disruption.

A two-storey office and plant in the GTA: solar film on the perimeter glass, frosted bands on the boardroom and partition glass with the company's logo cut into the film, and branded privacy on the entrance. The client brought us back for a second phase.

“The team was professional, reliable, and easy to work with throughout. Communication was clear, timelines were met, and the installation was done to a high standard. We would confidently recommend Winsolux for commercial window film work.”— Phillip C., Google review
Glass-walled boardroom with a frosted privacy band Office glass partition with a frosted privacy band Commercial building entrance with film on the doors and windows

How a commercial job runs

Built for buildings that can't close.

Most of our commercial work happens evenings and weekends. We phase larger projects by floor or elevation so your people are never working around us, and one person — usually one of the owners — runs the job from the first site visit to the final walkthrough.

1

Site visit & glass survey

We measure every pane, note glass type and frame condition, and flag anything that shouldn't be filmed.

2

Proposal with options

Priced by elevation or zone, with film specs and test data attached so facilities, ownership or an insurer can sign off.

3

Scheduled install, after hours if needed

Crew sized to the job, site protected, work phased so the building stays open. Security film anchored to spec.

4

Walkthrough, documentation & warranty

Every pane inspected with you, warranty registered, and a record of what went where for your building file.

ASTM F3561

Forced-entry resistance after a simulated active-shooter attack.

EN 356 · P2A

European standard for resistance against repeated manual attack.

ASTM F1642

Airblast loading — keeps glass fragments out of the room.

UL 972

Burglary-resisting glazing material, with frame anchoring.

Standards apply to Madico SafetyShield® 1500 G2 installed with a qualifying anchoring system. Test summaries available on request.

Site visit

Send us the address. We'll come measure.

Call or text (289) 819-2470, email info@winsolux.com, or use the form and tell us roughly how much glass you're looking at.

Request a site visit
WINSOLUX

Security, solar and privacy window film. Authorized Madico SafetyShield® installer serving Toronto and the Greater Toronto Area.

ServicesSecurity filmResidentialCommercial
CompanyThe teamVehicle immobilizers (Autolox)ContactInstagram
Contact(289) 819-2470info@winsolux.comMaple, Ontario
SafetyShield®, FrameGard™ and Madico® are trademarks of Madico, Inc. Performance figures are typical values based on manufacturer data and independent third-party testing; actual results depend on glass type, framing and installation. Winsolux Window Film Inc. is an authorized installer of Madico window films. © 2026 Winsolux · Privacy · Terms